 |
Product Name |
Applications |
Comments |
Super Flux-A (Powder) |
All purpose , low
temperature flux for use in brazing both ferrous and non-ferrous metals
and alloys using silver brazing filler metals. Begins to melt and
dissolve oxides at 340�C. Fully molten at about 600�C and provides
adequate protection upto 750�C. Excellent in hot rodding operation used
to braze weld where the hot brazing rod is plunged into the dry powder.
Easy cleanup in hot water. |
Equivalent to ESAB's Rupatam A flux |
Super Flux-A1 (Powder) |
For
applications where a dry low volatile flux is required. Recommended for
use in 650-815�C range. Excellent in hot rodding operations. Easy
cleanup. |
Equivalent to Handy Dry Flux 6040. |
Super Flux-A (Paste) |
General
purpose, low temperature flux which provides excellent adhesion and
creamy smooth consistency. For brazing all ferrous and non-ferrous
alloys. Begins to melt and dissolves oxides at 320�C, fully molten at
600�C, it provides excellent protection of parts upto 870�C. Easy
cleanup with hot water. |
Equivalent to Handy Flux (Paste) |
Super Flux Type D & DB (Slurry) |
For
automatic dispencing as controlled dabs or sprays. Same formullations
as Super Flux-A (Paste), with additives to provide a lower (pourable)
viscosity. Type DB has an additional ingredient for use with more
refactory oxides, such as in automated brazing of carbides. |
Equivallent to Handy Flux Type D & DB (Slurry). |
Super Flux-B (Powder/Paste) |
For
brazing high chromium stainless stells, tungsten and chromium carbides,
and molybdenum alloys. Its tempreature range is 600-925�C and it is
useful in applications where local overheating may occur, as in fast
induction heating. |
Equivalent to Handy Flux Type B-1 |
Super Flux-C (Powder/Paste) |
For
brazing aluminium bronze (A1-5 to 8,Cu-bal.), aluminium-silicon bronze
(A1-7, Si2, Cu-bal.) and nickle-aluminium-bronze(A1-9.5, Ni-5, Fe-2.5,
Mn-1, Cu-bal.) using silver brazing filler metals. Active range:
600-870�C. Not recommended for use with aluminium or titanium-base
alloys. |
Equivalent to Handy Flux Type A-1. |
Super Flux-D (Powder/Paste) |
For
applications with long heating cycles as in furnace brazing. Also
useful in induction heating operations, where tendency to overheat may
exist. active range: 650-870�C. |
Equivalent to Handy Flux Type LT. |
Super Flux Hi- Temp |
Used
where brazing tempreatures go into the 870-1100�C range or for
considerable lengths of time above 785�C. |
Equivalent to Handy Hi- Temp Flux. |
Super Flux-E (Liquid) |
For
blazing in furnaces with poor atmosphere or joining jewellery parts
above 625�C. Primarily used where only a limited fluxing ability is
required. |
Equivalent to Handy Liquid Flux. |
Super Flux Hi-Temp M (Powder/Paste) |
Used
in the brazing of carbides, Stainless and alloy steels, and nickel
based alloys using copper alloy and gold alloy filler metals requiring
brazing tempreatures between 900-1200�C. |
Equivalent to Handy Flux Hi-Temp M. |
Super Flux-BRS (Powder) |
For
brazing or fusion welding various ferrous and non-ferrous metals and
alloys (like cast iron, steels, brass etc.) using Cu-Zn (brass) filler
metals. |
Equivalent to ESAB's Brazotectic Flux. |
Super Flux BRZ (Powder) |
For
brazing various ferrous and non-ferrous metals and alloys using Cu-Sn
(bronze) based filler metals. |
Equivalent to ESAB's Bronzotectic Flux. |
Alumibraze-A (Powder) |
For
brazing aluminium and its alloys using A1-12%Si filler metal. |
Equivalent to ESAB's Albratectic Flux. |
Alumibraze-B (Powder) |
Similar
to above but this flux becomes active at a lower tempreature thereby
minimizing damage to the aluminium base metal. Suitable for brazing
thin sections. |
Equivalent to Handy Flo-700 Flux. |
Alumiweld (Powder) |
For
welding aluminium and its alloys. |
Equivalent to ESAB's Alotectic Flux. |
Stainweld (Liquid) |
For
Welding stainless steels using niobium and other stainless steel rods. |
Equivallent to ESAB's Botectic Flux. |
Castweld-A (Powder) |
For
welding cast iron. |
Equivalent to ESAB's Castox Flux. |
Cupopaste-A |
Copper
brazing paste for furnace brazing steels. |
|
Solderflux-A (Paste) |
For
soldering applications. Active range: 260-425�C. |
Equivalent to Handy Flux Type TEC. |
|
|
Home
Specifications